FCS Main purpose#
In this section, you will find description of high level commands which can be sent
to the Filter Exchange System as a whole, and which implies at least 2 hardware subsystems :
- carousel and autochanger
- autochanger and loader
High-level commands#
Low-level commands#
Warning
One needs to be aware that normal operations should only consist of using the above high-level commands. The latter are mixing lower-level commands with hardware checks (e.g. autochanger trucks alignment).
When deciding to operate manually the lower-level commands, one will have to do these checks manually.
Best is to look at the detail of the high-level commands in order to have an overview of the sequence of internal operations and checks.
Filter list#
The list of filters known by FCS can be retrieved with the ccs-console
: